top of page

Get Qualified for More Jobs: Setting the Bar with Training

Updated: Sep 10, 2019

What HVAC equipment accomplished 20 years ago versus what it can accomplish today is totally different. Knowing that your team members are the subject matter experts, training on the latest available technology is essential to maintain new equipment and control systems. It is equally important to know how new equipment integrates with existing systems, to optimize total system performance.

Want 10% Off Fall Training? Use code: BISNOW

Why Get Training?

  • Get qualified for more jobs. The more knowledge and subject matter expertise you have, the more clients will seek you out to work on their whole building and not just one piece or type of equipment.

  • Learn to look at a building holistically and identify what equipment is dragging you or your client’s HVAC system down.

  • Understand how to properly maintain operation, check systems, calibrate equipment, utilize control programs, and communicate this to clients.

  • Spot problem areas before they become costly to avoid equipment failure.

If the user hasn’t been properly taught that a filter needs to be cleaned and checked at set intervals, the filter can get clogged and shut down the unit's compressor, resulting in a service bill and possibly a new compressor. It's a simple maintenance task that may take five minutes, but if the operator is unaware of this, there can be a pricey fix as well as a warranty issue.

Making Equipment Work For You

Maglev bearings, oil-free compressors, wireless sensors, metered data that translates into KPI, and new refrigerants all require different knowledge than legacy products that came before them. These new features also can provide more insight, more control, greater longevity, government compliance and the best value to the owner.

The most common training mistake is not allocating the necessary time to educate employees about how to operate and maintain today’s technologically enhanced HVAC equipment.

For more information on training offered in the DC area, click here. Boland is offering an exclusive 10% off their training classes to Bisnow readers until September 23, 2019 using code: “BISNOW.

Want 10% Off Training? Use code: BISNOW

Upcoming Fall Training Schedule:

  • September 10-11: Introduction to Basic HVAC (Gaithersburg, MD)

  • September 12: Centrifugal Chillers (Gaithersburg, MD)

  • September 17-19: VRF CITY MULTI Essentials (Lanham, MD)

  • September 24: Helical Rotary Air-Screw Chillers (Gaithersburg, MD)

  • October 8: Tracer SC (Gaithersburg, MD)

  • October 10: Boilers (Gaithersburg, MD)

  • October 15: IntelliPak Rooftops (Gaithersburg, MD)

  • October 17: DOAS (Horizon/KCC) (Gaithersburg, MD)

  • November 5: Voyager Rooftops (Gaithersburg, MD)

  • November 5-6: AC Clinic (Chantilly, VA)

  • November 12: Schematics and Wiring Diagrams (Gaithersburg, MD)

  • November 14: Introduction to Tracer Summit (Gaithersburg, MD)

  • November 19: Self-Contained Units (Gaithersburg, MD)

  • November 21: VAV and Outdoor Air Terminal Units (Gaithersburg, MD)


bottom of page